
{{ variable.name }}
The VT-1000 is a PLC-controlled roll forming line that uncoils PPGI, GI, aluminum or color steel coil, cold-forms a trapezoidal roof and wall profile, cuts panels to a preset length and stacks them at the run-out table, from decoiler to stacker in one line. Coil thickness covers 0.30-0.70 mm, coil width 1000 / 1200 / 1250 mm, effective panel width 840 / 860 / 750 / 900 / 1000 mm depending on profile, and line speed 0-15 m/min.
Cut length is held at ±1.0 mm and profile at ±0.5 mm, so trapezoidal sheets stay square for purlin spacing and side laps and installers do not re-cut on site.
A PLC with 7-inch color touch screen runs feeding, forming, cutting and counting. The operator loads coil and monitors output.
13-18 forming stations of high-grade 45# forged steel rollers, CNC ground, mounted on Φ70 / Φ75 / Φ80 mm solid steel shafts.
A 3.0 kW / 4.0 kW hydraulic station with cooling radiator gives clean, square cut ends on color-coated coil; stop-to-cut is available.
IP54 sealed electrical cabinet, enclosed self-lubricating bearings and chain drive covers, rated for ambient -20°C to +50°C with air or water cooling on the hydraulic station.
| Parameter | Standard Specification |
|---|---|
| Suitable material | PPGI / GI / aluminum coil / color steel |
| Raw material thickness | 0.30-0.70 mm (roof and wall panels) |
| Feeding coil width | 1000 mm / 1200 mm / 1250 mm |
| Effective width | 840 mm / 860 mm / 750 mm / 900 mm / 1000 mm |
| Forming stations | 13-18 roller stations |
| Working / forming speed | 0-15 m/min standard production |
| Roller material | High-grade 45# forged steel, CNC ground |
| Shaft diameter and material | Φ70 mm / Φ75 mm / Φ80 mm solid steel shaft |
| Tolerance | Length ±1.0 mm; profile ±0.5 mm |
| Cutting mechanism | Hydraulic post-cutting / stop-to-cut system |
| Control system | PLC control and 7-inch color touch screen |
| Main motor power | 4.0 kW / 5.5 kW / 7.5 kW cycloidal reducer |
| Hydraulic station | 3.0 kW / 4.0 kW with cooling radiator |
| Voltage and frequency | 380V, 50Hz, 3-phase |
The frame is welded from national-standard H-beam steel with reinforced side arch plates of 18-20 mm thickness, so the structure holds rigidity under continuous 5-10 ton coil loading. Rollers are 45# forged steel, CNC ground, and shafts are solid steel in Φ70, Φ75 or Φ80 mm. Machines receive four-layer anti-corrosion treatment and pass a three-tier inspection covering electrical safety, hydraulic sealing, forming accuracy and safety protection; inspection video, paper report and material certificates are available on request.
The line is used in construction and building materials, steel structure engineering and metal roofing and wall cladding: industrial warehouses, villas, steel structure workshops, factory roofs and wall panels. The working-condition package of IP54 cabinet, enclosed bearings and chain covers suits continuous production in dusty workshops, and the -20°C to +50°C range covers cold and tropical plants. Matched equipment includes decoiler, hydraulic cutting unit, run-out table, auto stacker and air compressor.
Roof panelsWall claddingSteel structure workshopsWarehousesVillas
Rollers are developed from a tile sample or drawing so the machine matches the profile you already sell, and effective width is set to your market requirement. We also customize voltage and frequency, branding and packaging, and support OEM, ODM and full customization. Additional matched equipment such as decoiler, run-out table and auto stacker can be quoted with the line.
A steel plant in Chile took two VT-1000 lines for 840/860 steel wall sheet pressing, in service three years. Output rose 40 percent because one machine runs two profiles, scrap fell from 3.8 percent to under 0.4 percent, and the customer reports USD 28,000+ saved per year in coil losses. The order included on-site installation guidance, operator training, strict pre-delivery testing, full technical drawings, operation manuals and a spare parts list, plus long-term after-sales follow-up and spare parts supply.
PPGI, GI, aluminum coil and color steel from 0.30 mm to 0.70 mm, in coil widths of 1000 mm, 1200 mm or 1250 mm depending on configuration.
0-15 m/min for standard production; the PLC allows forming speed to be adjusted.
One operator can run the line, and continuous 24/7 lines are normally handled by one to two operators per shift.
Yes. Rollers are developed from your drawing or tile sample and the effective width is fixed to your profile.
380V, 50Hz, 3-phase is standard; voltage and frequency are customized to your site supply.
Technical drawings, English operation manual, spare parts list, inspection video and report on request, commissioning guidance and 7x24 remote technical support.
Send your profile drawing, coil width, thickness and target speed, and we reply with factory price, drawing and a demo video.
Contact: Wendy
Email: wendy@vantoolsgroup.com
Tel / WhatsApp: +86 19031155679
Address: 063000, Qingbeidao 60#, Lubei District, Tangshan, China
Catalogue: Roll Forming Machine Catalog from Tangshan Vantools Industries Co., Ltd.