
{{ variable.name }}
The VT-1000 double layer roll forming machine carries two forming frames on one base: a roof profile on the upper layer and a wall profile on the lower layer. One line, one operator and one footprint deliver both sheets, so a plant selling roofing and cladding does not need a second machine or a second installation crew. Both layers run PPGI, GI, aluminum or color steel coil from 0.30 mm to 0.70 mm under PLC control with a 7-inch color touch screen.
The double layer frame produces roof sheet and wall sheet together, saving floor space and the cost of a second machine.
No oil-canning in the pan, square ends, cut length held within tolerance and run-to-run consistency with no drift between batches.
Rollers are developed from your tile sample or drawing, so the line matches the profile you already sell.
PLC and touch screen run feeding, forming, cutting and counting; the operator only loads coil.
Container loading plan, English manual, commissioning support and spare rollers kept in stock.
| Parameter | Standard Specification |
|---|---|
| Frame configuration | Double layer frame, roof profile and wall profile on one base |
| Suitable material | PPGI / GI / aluminum coil / color steel |
| Raw material thickness | 0.30-0.70 mm |
| Feeding coil width | 1000 mm / 1200 mm / 1250 mm |
| Effective width | Per profile: 840 / 860 / 750 / 900 / 1000 mm |
| Forming stations | 13-18 roller stations per layer |
| Working speed | 0-15 m/min |
| Roller material | High-grade 45# forged steel, CNC ground |
| Shaft diameter | Φ70 mm / Φ75 mm / Φ80 mm solid steel shaft |
| Tolerance | Length ±1.0 mm; profile ±0.5 mm |
| Cutting mechanism | Hydraulic post-cutting / stop-to-cut system |
| Control system | PLC and 7-inch color touch screen |
| Main motor power | 4.0 kW / 5.5 kW / 7.5 kW cycloidal reducer |
| Hydraulic station | 3.0 kW / 4.0 kW with cooling radiator |
| Voltage and frequency | 380V, 50Hz, 3-phase |
The base is welded from national-standard H-beam steel with 18-20 mm reinforced side arch plates to stay rigid under continuous 5-10 ton coil loading. Rollers are 45# forged steel, CNC ground, and shafts solid steel. Electricals sit in an IP54 sealed cabinet, bearings are enclosed and self-lubricating, and chain drive covers keep metal powder out of the transmission, which suits dusty shops and ambient temperatures from -20°C to +50°C.
One double layer line covers the two sheets most building projects order together: roof panels and wall cladding for warehouses, villas, steel structure workshops and factory buildings. It is used in construction and building materials, steel structure engineering and metal roofing and wall cladding, and saves the floor area a second machine would occupy.
Roof and wall claddingWarehousesSteel structure workshopsVillasTwo-profile production
Both layers are built to your drawings or tile samples, so the roof and wall profiles match the panels you already sell. Voltage, frequency, branding and packaging are customizable, and OEM, ODM and full customization are supported. A container loading plan is prepared before shipment.
An OEM customer took one double layer VT-1000 line into service one year ago to uncoil and cold-form color-coated or galvanized coil into roofing and wall sheets, cut to preset length and stack finished panels. Reported results: dead-flat panels with no oil-canning and no edge waviness, dimensional accuracy within tolerance, square ends, and consistent quality with no drift between batches. The project included a container loading plan, English manual, commissioning support and spare rollers in stock.
One frame produces roof and wall sheet together, saving floor space and the investment of a second machine, with a single operator running both profiles.
The line handles PPGI, GI, aluminum coil and color steel from 0.30 mm to 0.70 mm; the combination is confirmed against your two drawings.
0-15 m/min, adjustable through the PLC for standard production.
Length tolerance ±1.0 mm and profile tolerance ±0.5 mm, with square ends and no edge waviness reported on delivered units.
With a container loading plan, reinforced waterproof and shockproof export packaging, shipped via Tianjin Port.
English manual, commissioning support, operator training, spare rollers in stock and 7x24 remote technical support.
Contact: Wendy
Email: wendy@vantoolsgroup.com
Tel / WhatsApp: +86 19031155679
Address: 063000, Qingbeidao 60#, Lubei District, Tangshan, China