
{{ variable.name }}
This wide configuration of the VT-1000 takes 1250 mm coil and produces panels up to 1000 mm effective width, using up to 18 forming stations on Φ80 mm solid steel shafts, a 4.0 / 5.5 / 7.5 kW main motor with cycloidal reducer and a 3.0 / 4.0 kW hydraulic station with cooling radiator. Cut length is held at ±1.0 mm and profile at ±0.5 mm, so wide panels stay square over long production runs.
1250 mm coil input feeds a profile with up to 1000 mm effective width, covering more roof area per running metre than narrow profiles.
Wide profiles are formed over 13-18 stations of CNC ground 45# forged steel rollers, giving controlled profile tolerance of ±0.5 mm.
The heaviest shaft option in the range gives rigidity across the wider roller stack during continuous production.
Main motor up to 7.5 kW with cycloidal reducer, paired with a 4.0 kW hydraulic station and cooling radiator for post-cutting.
Feeding, forming, cutting and counting run automatically, so one operator loads coil and monitors output.
| Parameter | Wide Coil Specification |
|---|---|
| Suitable material | PPGI / GI / aluminum coil / color steel |
| Raw material thickness | 0.30-0.70 mm |
| Feeding coil width | 1250 mm (range 1000 / 1200 / 1250 mm) |
| Effective width | Up to 1000 mm (range 840 / 860 / 750 / 900 / 1000 mm) |
| Forming stations | Up to 18 roller stations |
| Working speed | 0-15 m/min |
| Roller material | High-grade 45# forged steel, CNC ground |
| Shaft diameter and material | Φ80 mm solid steel shaft (Φ70 / Φ75 / Φ80 mm available) |
| Tolerance | Length ±1.0 mm; profile ±0.5 mm |
| Cutting mechanism | Hydraulic post-cutting / stop-to-cut system |
| Control system | PLC and 7-inch color touch screen |
| Main motor power | 7.5 kW cycloidal reducer (4.0 / 5.5 / 7.5 kW available) |
| Hydraulic station | 4.0 kW with cooling radiator (3.0 / 4.0 kW available) |
| Voltage and frequency | 380V, 50Hz, 3-phase |
The machine frame is welded from national-standard H-beam steel with 18-20 mm reinforced side arch plates, built to hold rigidity under continuous 5-10 ton coil loading. Rollers are 45# forged steel, CNC ground, and the shaft is solid steel at Φ80 mm in this configuration. The electrical cabinet is IP54 sealed and rated for ambient temperatures from -20°C to +50°C, with air or water cooling on the hydraulic station for tropical plants and electric pre-heaters for sub-zero regions. Machines pass a three-tier inspection with inspection video, report and material certificates available on request.
Wide panels suit long roof runs and large wall areas on industrial warehouses, steel structure workshops, factory buildings and villas, where a 1000 mm effective width covers more area per running metre. The line belongs to construction and building materials, steel structure engineering and metal roofing and wall cladding supply, and runs on decoiler, hydraulic cutting unit, run-out table, auto stacker and air compressor as matched equipment.
Wide roof panelsWall claddingIndustrial warehousesSteel structure workshops
Rollers are developed from your drawing or tile sample so the wide profile matches the panel you already sell. Coil width, effective width, station count, motor power, voltage and frequency are confirmed before production; branding and packaging are customizable, and OEM, ODM and full customization are supported.
It takes 1250 mm coil and forms a panel of up to 1000 mm effective width, on Φ80 mm shafts with up to 18 stations and a 7.5 kW main motor.
Coil width is set by the machine configuration. Tell us the widths you sell and we confirm the configuration in the quotation.
PPGI, GI, aluminum coil and color steel from 0.30 mm to 0.70 mm.
0-15 m/min working speed, cut length tolerance ±1.0 mm and profile tolerance ±0.5 mm.
One operator can run the PLC line; continuous 24/7 production is normally covered by one to two operators per shift.
380V, 50Hz, 3-phase is standard and voltage or frequency is customized to your site supply.
Profile drawing, required coil width, material thickness and target output - we reply with factory price, drawing and a demo video.
Contact: Wendy
Email: wendy@vantoolsgroup.com
Tel / WhatsApp: +86 19031155679
Address: 063000, Qingbeidao 60#, Lubei District, Tangshan, China